The mini combine harvester from Punni is a self-propelled. In a single operation it can do activities like cutting, trashing and filling. It comes with 2 variant, one with 75hp engine and another with 101hp engine.
Super Seeder is latest technology for combined application of soil preparation, Seeding with fertilizer and Pressing wheel. Super Seeder helps plough the standing paddy residue and sow seeds for the next wheat crop, in a single operation. It not only helps in cost time saving but is environment friendly too.
Features of Punni Super Seeder :
India's #1 fully gear drive Super seeder, #1 choice of farmers in Haryana. No need to change sprockets and chain.
Four speed gear box for smooth synchronization with different tractor models
Cutting the standing crops at proper grain and straw moisture content at different height of cut from ground level.
Feeding the cut crop to threshing unit. The throughput of crop depends upon the density, height and moisture content of grain and straw.
Threshing the crops. The threshing efficiency, cleaning efficiency and grain breakage depends upon moisture content, density, grain straw ratio and amount of throughput.
Cleaning and separating the grain from straw / fine straw (Bhusa)
Collecting the grain in a container/ grain tank
Self- propelled Grain Cruiser- Go green combine harvester
• Saving of time, money and labor
• Fine straw (Bhusa) can be obtained as bi product
• Small farmers welcome the work to be get done by custom hiring
• Straw recovery is 50 per cent
• The straw split was 92.36% and length of bhusa was 2.0 to 2.5 cm.
• There was an additional grain recovery of 35-60 kg/ha. .depending upon crop and field conditions
• Straw combine is very economical. it is used extensively by the farmers as the cost of wheat fine straw has risen and usage of combine has increased.
• save environmental hazards.
Cutting the standing crops at proper grain and straw moisture content at different height of cut from ground level.
Feeding the cut crop to threshing unit. The throughput of crop depends upon the density, height and moisture content of grain and straw.
Threshing the crops. The threshing efficiency, cleaning efficiency and grain breakage depends upon moisture content, density, grain straw ratio and amount of throughput.
Cleaning and separating the grain from straw / fine straw (Bhusa)
Collecting the grain in a container/ grain tank
Self- propelled Grain Cruiser- Go green combine harvester
Cutting the standing crops at proper grain and straw moisture content at different height of cut from ground level.
Feeding the cut crop to threshing unit. The throughput of crop depends upon the density, height and moisture content of grain and straw.
Threshing the crops. The threshing efficiency, cleaning efficiency and grain breakage depends upon moisture content, density, grain straw ratio and amount of throughput.
Cleaning and separating the grain from straw / fine straw (Bhusa)
Collecting the grain in a container/ grain tank
Self- propelled Grain Cruiser- Go green combine harvester
Laser is a device that produce a very concentrated beam of light, which is single, very thin, high energy beam. A rotating laser light source is located somewhere in the field. As the laser rotates rapidly, a virtual "plane" of light is produced in the field. If the earthmover climbs over a high spot in the field, the blade will dig in as the receiver tries to stay locked on to the laser source.
Reduces the amount of water required for land preparation
Reduces weed problem
Uniform moisture available for crops, uniform maturity and uniform yield
Save water: Laser controlled land levelling technology could normally save water by 30%.
Save land: Laser controlled land levelling technology controls the ridge of field and could save 3% to 5% of land.
Save fertilizer: Because of increasing the flatness, it decreases the loss of fertilizer and increases the rate of utilization of fertilizer to 20%, ensuring better seedling emergence efficiency.
Increase production: Every unit area increases the production by 20% to 30%.
Decrease cost: Using the technology could decrease the production cost of rice, wheat, soybean, cotton and corn by 6.3% to 15.4%.
Main features of Tractor drawn zero till seed -cum- fertilizer drill are: Timeliness in sowing 7-8 days earlier than traditional, saves 60-75 liters HSD per hectare which resulted in saving of natural resources and environment, 30-40% less infestation of weeds, saves irrigation water up to 10-15% during first irrigation, no crust formation after rains, improvement in soil structure and fertility, no lodging of crops at the time of maturity in case of heavy rains and winds and machine is simple, heavy in weight resulting in less vibration and easy to operate
The tractor operated rotavator is quite effective to prepare seed bed in dry as well as wet conditions. The Main features of rotavator are: Saves water, time, energy, labor and money, Level of field not disturbed and used throughout the year, No injury to finger during transplanting when field is prepared with rotavator, Boron steel blades that last 50% more than hi carbon. Available in “L, J & C” type blades, Heavy duty PTO with shear bolt, Easy depth adjustment
Features of Punni Rotavator :
High Quality Gear Box
Multi Speed Feature
High Quality Blades
Heavy Duty Body
Low Maintenance
High Efficiency
Punni Rotavator – India’s best rotavator has multi speed functionality. It’s multi speed gear box provides 4 different rpm speeds for various types of soil condition. It’s gear box has been filled with oil for maximum performance. It has high quality blades which can loosen the soil up to 6 inches deep.
MAIN FEATURES:
Suitable for threshing almost all cereals, pulses and oil seed crops.
The total grain losses are with in prescribed limit.
Energy requirement is minimum for threshing different crops.
Feeding crop is very easy and comfortable. No fatigue while feeding the crop.
Transportation from one field to another is very easy.
High output and very low maintenance.
Reviews
There are no reviews yet.